2 required per car

High-quality OEM front chin spoiler kit replacement that includes all necessary installation hardware. We source this part in Germany to ensure quality, reliability and precise fitment. Kit includes: qty. 1 front chin spoiler 930 / 911 wide body / turbo look 1975-89 - 93050305501 qty. 11 spoiler shim - 91150302300 qty. 1 left spoiler mounting plate qty. 1 right spoiler mounting plate qty. 15 m6 stainless nuts qty. 15 m6 washers sold individually. 1 needed per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)

Baby turbo mirror sporty and aerodynamic. Universal mounting for easy installation. Includes --visual filter-- technology to filter uv and fluorescent light flashbacks. This is one of our best sellers! Mounting allen bolts a6x12.

General Fitment

Genuine rear "big red" brake kit which includes 993 turbo calipers, discs, pads, damping plates, warning contacts and hex head mounting bolts. Please note: this kit requires you to reuse your original emergency brake and dust shield.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Brey-krause harness guide bars properly locate a racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking. Brey-krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load.

Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

You can bolt them in for a weekend auto cross or track event and quickly remove them for work on monday.

Fits: 968cs (93-95), 968 (92-95), turbos (88-91), turbo (86-88), 944cup (86-89), 944s2 (89-91), 944s (87-88), 944 (...(choose a part on the right to read more)

General Fitment

Side skirts set tradition rs our side skirts are much wider than the stock components, which leads to a wider underbody and thus to more downforce. The mounting is very easy. Plug&play at the OEM screwing points. For all Porsche 997 Carrera with the (c4) wide body | 4 | 4s | GT2 rs | GT3 rs | turbo

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Rear diffuser for all Porsche 997.1 Carrera models. The mounting is very easy. Plug & play with 3M double tape and 2 screws on the screwing points. Not for models with the turbo | GT2 | GT3 rear bumper

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For all Porsche 997 Carrera models with the standart front bumper! The mounting is very easy. With some screwing points under the Porsche front bumper. Not for models with the aerokit or turbo | GT2 | GT3 front bumper

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Known as: washer 6.4 / washer a 6.4 / washer b 6.4 / washer 6.5 / washer a6.4 / washer mounting parts for air cleaner housing metal / washer not for (s)(d) m >> 075 3003 m >> 083 6549 / washer 4.3 / washer r 6.6 / washer a 6.6 / washer a 10.5 / washer 5.3

View/Change Diagram

356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1950-59 - Body
356 1960-65 - Engine	356 1960-65 - Engine
356 1960-65 - Engine	356 1960-65 - Engine
356 1960-65 - Engine	356 1960-65 - Engine

Material: typ 304, aus rostfreiem stahl.
Oberfläche: pulverbeschichtet in schwarz
Gewicht: 4 lbs.
Modelle: modell 846r9080 ermöglicht den einbau des Porsche GT3 sitzes auf der fahrerseite. Modell 846r9081-ermöglicht den einbau des Porsche GT3 sitzes auf der beifahrerseite
Installation: für den einbau der GT3 sitze in 996/997/Boxster für direkte boden-montage wird noch zusätzlich 846r9042( adapter) benötigt.
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation:...(choose a part on the right to read more)

General Fitment

Material: typ 304, aus rostfreiem stahl.
Oberfläche: pulverbeschichtet in schwarz
Gewicht: 4 lbs.
Modelle: modell 846r9083 ermöglicht den einbau des Porsche GT3 sitzes auf der beifahrerseite. Modell 846r9082-ermöglicht den einbau des Porsche GT3 sitzes auf der fahrerseite
Installation: für den einbau der GT3 sitze in 944,964,965,993 für direkte boden-montage wird noch zusätzlich 846r9042( adapter) benötigt.
Verschiedenes: ermöglicht größeren fahrern die bodenmontage der sitze . Ermöglicht nach wie vor die sitzverstellung im rahmen von ca 50cm vor und zurück.der adapter 846r9042 ist für die installation notwendig. . 846r9031 optional als gurt halterung für 846r908x serie.

Fits: GT2 (96-...(choose a part on the right to read more)

General Fitment

Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model recaro spg xl to floor on driver's side.
Installation: adapts GT3 seats to 944,964,965,993 for direct floor mount
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846r9042 adapter is required for installation. R-908x series seat mount kits provide an inboard seat belt mount. 846r9031 optional anti-sub strap mount for 846r908x series.

Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-...(choose a part on the right to read more)

General Fitment

Gurtrohr nur in verbindung mit bügel/käfigneubestellung möglich

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-02), 2.5 (97-99), 968cs (93-95), 968 (92-95), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), t...(choose a part on the right to read more)

General Fitment

Known as: rubber mounting

View/Change Diagram

924 1986-88 - Body	944 1985-88 - Body
944 1989-91 - Body	968 1992-95 - Body
911 2005-08 - Engine	911 Turbo/GT2 2007-09 - Engine

Aerodynamic shape for an nonintrusive look. Includes "visual filter" technology for driver comfort. Black matte finish with universal mounting. Passenger side includes a panoramic wide angle lens for added safety.

General Fitment

Aerodynamic shape for an nonintrusive look. Includes "visual filter" technology for driver comfort. Black matte finish with universal mounting. Passenger side includes a panoramic wide angle lens for added safety.

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

Californian mirror sleek design! This is the ultimate in aerodynamic mirrors with state-of-the-art vitaloni technology. Will withstand racing windspeeds. Passenger side includes a panoramic wide angle lense for added safety. mounting allen bolts a6x12

General Fitment

These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.

General Fitment

Years of research have revealed the best combination of colors for readability and reduced eye fatigue. The result: vdo’s cockpit instruments – great styling with uncompromising vdo quality. Highly visible fire-red pointer for instant recognition teamed up with a flat black dial for contrast and crisp, white numerals for high readability. Roof-style bezel to help shadow the dial. State-of-the-art production quality control of all gauges and tested in some of the toughest applications in the world. Vdo should be the only gauge good enough for your Porsche.

Boost gauge, 0-15psi, 12 vdc, voltage, connection type: ¼” spade, mounting hole size 2 1/16". Vdo vacuum tube kit (6 foot- rvdo150851, 16 foot- rvd...(choose a part on the right to read more)

General Fitment

Vdo vision series turbo boost gauge.

Range: 0-30 in hg to 0-25 psi
Voltage: 12 vdc
Bezel color: black
Mounting hole size: 2 1/16”
Connection type: 1/8-27 npt

General Fitment

Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Front right rotor (original Porsche) 1 qty. Front left rotor (original Porsche) 1 qty. Oem set of front pads (4 total) 2 qty. Oem brake warning sensors 4 qty. Oem brake pad damping plates (for 44 mm piston) 4 qty. Oem brake pad damping plates (for 36 mm piston) 2 qty. Oem brake caliper mounting bolts - m12x72mm sold as a kit. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.